Engineering Quality LED Street Light Manufacturer

The high-performance and sustainable road lighting solution.

More than 10 years of industry experience

LED Street Light OEM & ODM Service

Different designs have been created that incorporate various types of LEDs into a light fixture. Either few high-power LEDs or many low-power LEDs may be used. The shape of the LED street light depends on several factors, including LED configuration, the heat sink used with the LEDs and aesthetic design preference.

Quality assurance

CB Certification

Our LED street light can not only pass CB certification, but also have the quality to apply for CE and RoHS certification. To ensure long-term effective use in large warehouses and large buildings.

  • Applicable to a variety of large spaces with low maintenance costs.
  • COB or SMD light source can be selected.
  • The heat dissipation performance is optimized to effectively protect the internal components of the lamp.
Email Us
Extreme Sports Bike
Extreme Sports Mountain Climbing

LED Street light features

Why LED Street Lamp

In performing a LED street lighting project, easy LED luminary models simplify the optimization for high-performance illumination designs.These practical equations may be used to optimize LED street lighting installations in order to minimize light pollution, increase comfort and visibility, and maximize both illumination uniformity and light utilization efficiency.

Excellent Electrical Performance

high power factor, low current harmonics, constant voltage power supply, and output constant luminous flux.

Environmental Protection

It uses solid mercury agent, which will not pollute the environment even if it is broken, and has a recyclability rate of more than 99%, which is a real environmentally friendly green light source.

All Advantages

Compared with incandescent lamps, the energy saving is about 75%. The luminous flux of 85W floodlights is roughly the same as that of 500W incandescent lamps.

Because of its high working frequency, it is regarded as “no stroboscopic effect at all”, which will not cause eye fatigue and protect eye health.

in the emitted light, the proportion of visible light is more than 80%, and the visual effect is good.
It can be started and restarted immediately, and there will be no light decay phenomenon in ordinary electrode discharge lamps when switched multiple times.
the color rendering index is greater than 80, the light color is soft, and the natural color of the illuminated object is presented.
it can be installed in any direction without limitation.
General incandescent lamps, fluorescent lamps, energy-saving lamps, and other gas discharge lamps have filaments or electrodes, and the sputtering effect of the filaments or electrodes is an inevitable component that limits the service life of the lamp. High-frequency electrodeless discharge lamps require no or less maintenance and have high reliability. The service life is as high as 60,000 hours (calculated by 10 hours per day, the service life can reach more than 10 years). Compared with other lamps: 60 times that of incandescent lamps; 12 times that of energy-saving lamps; 12 times that of fluorescent lamps; 20 times that of high-pressure mercury lamps; the long life of floodlights greatly reduces maintenance troubles and replacement times , saving material costs and labor costs, and can ensure long-term normal use. Since the floodlight has no electrodes, it relies on the principle of electromagnetic induction and the principle of fluorescent discharge to emit light, so it does not have necessary components that limit its life. The service life is only determined by the quality grade of electronic components, circuit design and the manufacturing process of the foam body. Generally, the service life can reach 60,000 to 100,000 hours.

Get A Quote Now

Email us for more LED street light information or custom requirements.

  • 0086 15913338818


choose what you need

LED Street Light Series

Replacing sodium street lights with LED street lights is the best energy-saving solution.

Production Process Flow

The product quality of the street light is one of the aspects that we are most concerned about.

Step 1

Assemble the case

Step 2

Install light board

Step 3

Welding lamp board line

Step 4

Install the power supply

Step 5

Fixed glass lens

Step 6

Finished product aging

Knowledge 1


1) According to the height of street lights: high pole lights, middle pole lights, road lights, garden lights, lawn lights, buried lights;
(2) According to the material of the street lamp pole: hot-dip galvanized iron street lamp, hot-dip galvanized steel street lamp and stainless steel street lamp;
(3) According to the street light source: sodium lamp street lamp, LED street lamp, energy-saving street lamp, new Somin xenon street lamp.
(4) According to the shape: Chinese lamps, antique lamps, landscape lamps, single-arm street lamps, and double-arm street lamps.
(5) According to the power supply mode: city circuit lights, solar street lights, wind-solar hybrid street lights
Street lights involve lighting technology and are suitable for street lights. The purpose is to design a high-efficiency electronic energy-saving street lamp with long life, low power consumption, high power factor and small current harmonic content. The high-efficiency electronic energy-saving street lamp includes grid high-voltage drain branches R1, C1, rectifier bridges D1-D4, power factor correction branches C2, D5, D6, high-frequency burr filter branches L1, L3, and high-frequency oscillation circuit connected in sequence. BG1-BG2, start branch L2, C7 and lamp T; save 80% of electricity compared to the previous street lamps; harmonic content THD < 25%, prolong lamp life up to 3-4 times.

Knowledge 2

Development status of street lamps

The stock of street lamps in China is between 28 million and 30 million. In recent years, the number of new street lamps is 15%-20%, about 3 million to 6 million. According to the number of new street lamps every year, all LED lamps and lanterns, each 1000-2000 yuan, the annual increment is 3 billion-6 billion yuan. The failure rate of LED street lights for more than 6000 hours is less than 1%. Lighting accounts for about 19% of the world’s electricity consumption. If the efficiency of the lighting system adopted in the world is doubled compared with the existing one, it can be said that it is equivalent to removing half of the electricity consumption and heat rejection in Europe. A global independent test has been established a few days ago, and LED street lights can save up to 85% of energy. In December 2011, my country produced 250 million sets of lamps and lighting devices, a year-on-year increase of 12.45%. From January to December 2011, the national output of lamps and lighting devices reached 2.5 billion sets, a year-on-year increase of 6.38%. Judging from the output of various provinces and cities, from January to December 2011, the output of lamps and lighting devices in Zhejiang Province reached 1.07 billion sets, a year-on-year increase of 9.13%, accounting for 42.40% of the national total output; the output of lamps and lighting devices in Guangdong Province reached 1.07 billion sets. 870 million sets, a year-on-year decrease of 4.44%, accounting for 34.43% of the country’s total output. In 2011, China’s LED market will grow from 4.7 billion US dollars in 2010 to 5.8 billion US dollars, an increase of 23%. LED has become a popular product made in China, and it is an attractive investment field. In addition, government support for the industry appears to be having an effect. It is estimated that China’s LED market will reach US$6.9 billion in 2012 and US$11.1 billion in 2015, with a compound annual growth rate of 17.7% from 2010 to 2015. my country’s street lamp construction has achieved rapid development, the quality of road lighting has been continuously improved, and high-intensity gas discharge lamps are widely used, which can improve my country’s investment environment, promote rapid economic development, facilitate people’s lives, beautify the city and be an export-oriented modern city. construction played a big role.


Precautions for the purchase of street lamps

The first is whether the heat dissipation of the LED street lamp is reasonable (this mainly depends on whether the heat dissipation aluminum of the lamp head is sufficient)
Second, look at the brand of led lamp beads, there is a big gap between good and bad,
The third is to see what the driving power supply of the LED street light is. A good power supply saves electricity and has a long life. It is almost impossible to say.

Please Get in Touch

Tell us about your future projects

OLALA lighting respects your privacy and we will not sell or provide your personal data to other third parties or allow them to use your personal data for their own purposes.